Multigas detector Industrial Scientific Ventis MX4

Multi-gas detector Industrial Scientific Ventis MX4 is a robust gas detector that can be equipped with a pump and sensors for up to four different gases.
It has a large illuminated LCD display which, among other things, shows measured values and gas type. Alarm indication occurs with a powerful (95 dB) siren, intense flashing light and vibration. Ventis also alarms when the hygienic limit values for toxic gases are exceeded.
The instrument is compatible with iNet™ (monitoring of the instrument's status via the Internet) and DS2™ docking station for automatic calibration and V-Cal docking station for functional testing, calibration and transfer of logged data to computer.
Ventis without pump is supplied with charger for 230 volts, belt clip, calibration hood and hose for manual calibration.
Ventis with pump is supplied with charger for 230 volts, approximately 3 meters of sampling hose and hose for manual calibration.

Sensor type and measurement range:
Combustible gas: 0 – 100% LEL (resolution 1%LEL)
Oxygen: 0 – 30 vol% O2 (resolution 0.1 vol%)

Choose up to two of the sensor types below:
Hydrogen sulphide: 0 – 500 ppm H2S (resolution 0.1 ppm)
Carbon monoxide: 0 – 1000 ppm CO (resolution 1 ppm)
Nitrogen dioxide: 0-150 ppm NO2 (resolution 0.1 ppm)
Sulfur dioxide: 0-150 ppm SO2 (resolution 0.1 ppm)

Options:
Color: black/orange
Pump: yes/no
Battery type for instruments without pump: Dry battery / Lithium-ion / Lithium-ion with increased capacity
Battery type for instruments with pump: Dry battery / Li-ion with increased capacity

Product sheet

Video
[video_lightbox_youtube video_id=”UAhAnR6eWA0?” width=”640″ height=”480″ anchor=”Uppstart”]
[video_lightbox_youtube video_id=”_kCXftVp9sg?” width=”640″ height=”480″ anchor=”Genomgång instrument”]
[video_lightbox_youtube video_id=”OzIJtXHa82k?” width=”640″ height=”480″ anchor=”Menyer”]
[video_lightbox_youtube video_id=”EY27ibvGv38?” width=”640″ height=”480″ anchor=”Bumptest”]
[video_lightbox_youtube video_id=”xnNDPOIzOko?” width=”640″ height=”480″ anchor=”Laddning batterier”]
[video_lightbox_youtube video_id=”VHyl7YBA3sk?” width=”640″ height=”480″ anchor=”Dataloggning”]
[video_lightbox_youtube video_id=”9P-piYI9m9k?” width=”640″ height=”480″ anchor=”Dockningsstation DS2″]

Gases	Oxygen O2, Explosive gases, Carbon monoxide CO, Nitrogen dioxide NO2, Sulfur dioxide SO2, Hydrogen sulphide H2S
Measure	103 x 68 x 30 mm (with pump 172 x 67 x 66)
Weight	182 grams (with pump 380 grams)
ATEX	ATEX II 2G EEx iad I/II C T4
Operating time	Without pump: Lithium-ion 12 hours, Lithium-ion with extended capacity 20 hours, Dry battery 8 hours
Charging time	Lithium-ion 3 – 5 hours, Lithium-ion with extended capacity 5 – 7 hours
Working temperature	-20°C to +50°C
IP	66 och 67
Data storage	Storage of measured values takes place every ten seconds, the memory capacity is enough for approximately three months of measured values. The 24 most recent alarm events and the 30 most recent error messages are also stored.

Multigas detector Industrial Scientific Ventis MX4