Multigas detector Industrial Scientific Ventis PRO 5

 Industrial Scientific Ventis PRO 5

Industrial Scientific Ventis PRO 5 is a small and robust gas detector that can be equipped with sensors for up to five different gases with or without a pump and has a large illuminated LCD display that shows measured values ​​and gas strokes. Handles water up to 1.5 meters deep for 1 hour. Alarm indication occurs with a powerful (95 dB) siren, intense flashing light and vibration. Ventis PRO 5 also alarms if the hygienic limit values ​​are exceeded for the toxic gases.

Ventis PRO 5 has a lot of news such as mandown alarm, panic button, iAssignTM Technology and InetNow online monitoring. There are a number of accessories such as car charger, data link, Connected security is the way of the future.

In addition to gas detection, the Ventis Pro5 has a dedicated alarm, panic button and custom on-screen messages, making it easy for workers to communicate and use the slide-on pump and various docking stations.
Supplied with LiIon battery, charger for 230 volts, belt clip, calibration hood and hose, if pumped also with 3 m test hose.

With the Ventis® Pro5 Multi-Gas Monitor, you have the flexibility to choose how you want your teams to connect. Whether you want peer-to-peer alarm sharing, live remote monitoring with location information, or a combination of the two, the Ventis Pro5 has you covered.

Measurement areas

  • Combustible gas: 0 – 100% LEL (resolution 1% LEL)
  • Methane 0 – 5% vol CH4 (resolution 0.01vol)
  • Oxygen: 0 – 30 vol% O2 (resolution 0.1 vol%)
  • Carbon monoxide: 0 – 2000 ppm CO (resolution 1 ppm)
  • Carbon monoxide, H2 low: 0 – 1000 ppm CO (resolution 1 ppm)
  • Carbon monoxide/Hydrogen sulphide: 0 – 1500 ppm CO (resolution 1 ppm) 0 – 500 ppm H2S (resolution 0.1 ppm)
  • Hydrogen sulphide: 0 – 500 ppm H2S (resolution 0.1ppm)
  • Hydrogen Cyanide 0 – 30ppm HCN (resolution 0.1ppm)
  • Nitrogen dioxide: 0 – 150 ppm NO2 (resolution 0.1 ppm)
  • Sulfur dioxide 0 – 150 ppm SO2 (resolution 0.1 ppm)
  • 0 – 100% LEL HC (resolution 1 ppm)
  • Carbon dioxide/Methane IR 0 – 5% vol CO2 (resolution 0.01 ppm)
  • 0 – 5% vol CH4 (resolution 0.01 ppm)
  • 5 – 100% vol CH4 (resolution 0.1 ppm

 

 

Download information below:

Product sheet

InetNow

iAssign

RGX Gateway

 

 

 

Characteristics

ATEX, Electrochemical, IR, Catalytic, Pump

Gases

Oxygen O2, Explosive gases, Toxic gases, Ammonia NH3, Carbon dioxide CO2, Carbon monoxide CO, Nitrogen dioxide NO2, LEL Lower explosion limit, Methane CH4, Sulfur dioxide SO2, Hydrogen sulphide H2S, Hydrogen cyanide HCN

Operating time

12 hours (Dry battery 8 hours)

Measure

104x58x36, with pump 172x67x65

Weight

200 g, with pump 390 g

Operating temperature

-40°C to +50°C

Data logging

Every 10 sec. stored approx. 3 months (FIFO)

Event log

60 alarm events

IP rating

IP 68

Warranty

Lifetime of the instrument, 2 years cells, pump and battery. 3 years O2, LEL, CO, H2S cells

ATEX

II 1G, Ex ia IIC, Ga, T4 II 2G, Ex d ia IIC, Gb, T4, IR sensor

SEND A REQUEST

Shopping Basket
Rulla till toppen