Gas detector MSA General Monitors S5000

Gasdetektor MSA

General Montor's S5000 operates over a wide temperature range using a variety of gas sensing techniques. Pioneering XCell® gas sensors with TruCal® technology extend calibration cycles up to 24 months and actively monitor sensor integrity for maximum peace of mind.

The detector automatically warns when the sensor's performance decreases and this increases safety and reduces the frequency of sensor replacement or calibration. With a 3-year warranty and 5-year expected life of sensors, ownership costs are significantly reduced.

 

 

 

Product sheet

GM S5000 Datasheet

 

 

 

 

Gases

Oxygen O2, Toxic gases, LEL Below the explosion limit

Measure

6.37” x 5.38” (162 x 137 mm)

Weight

8.0 lb. (3.6 kg), 316 SS

Operating temperature

Transmitter -55°C to + 75°C CB (sintered, Zones) -40°C to +70°C CB (screened, Div) -40°C to +75°C MOS (sintered, Zones) -40°C to +70°C MOS (screened, Div) -40°C to +75°C IR (CSA) -40°C to +75°C IR (ATEX/IECEx) -60°C to +75°C XCell (Comb) -55°C to +60°C XCell (Toxic/O) -40°C to +60°C HT (High Temp sensor) -40°C to +185°C

ATEX

Ex db IIC T5 Gb Ex nA nC IIC T4 Gc Ex tb IIIC T85°C Db

Warranty

S5000 transmitter 2 years XCell Sensors 3 years Passive comb., MOS, IR400/IR700 2 years Echem sensors Varies by gas

Cable requirements

3-wire shielded cable for one sensor and 4-wire shielded cable for dual sensor changes. Accommodates up to 12 AWG See user manual for mounting distance.

Relay

5 A @ 30 VDC; 5 A @ 220 VAC (3X) SPDT – fault, warn, alarm

Signal

Dual 4-20 mA source or sink, HART, Modbus, Bluetooth. Optional: without Bluetooth

Operating voltage

24 VDC nominal, 12 to 30 VDC

RS-485

Modbus RTU, suitable for linking up to 128 devices or up to 247 devices with repeaters

SEND A REQUEST

Shopping Basket
Rulla till toppen