Gas detector Crowcon XgardIQ
XgardIQ, intelligent fixed gas detector, increases the safety of workers in hazardous areas.
Available equipped with a variety of sensors for detecting explosive, toxic and asphyxiating gases.
(SIL-2) Safety Integrity Level 2 certified gas detector.
Simple and safe to use
- OLED display – Bright, clear display indicates gas level and detector status
- Easy calibration – Zero and calibration functions are performed via the display and keypad, without the need for a hot work permit or any special tools (e.g., no magnetic bar required)
- +Ve Safety Indicator – Confirms that the detector is working properly
- Event log feature – Stores all alarm, fault and maintenance events to provide a history of detector usage
- Remote sensor – Improves placement of the measurement
- Various installation options – can be wall mounted, mounted on a 50 mm (2 inch) pipe or using a selection of mounting accessories
- Industry standard 4-20mA output – compatible with virtually any control system
- Options for HART communication and RS-485 Modbus
Easy maintenance
- Hot-Swap Sensor Modules – Sensors can be easily replaced with one hand without the need for tools or a hot work permit
- Auto-Sense Feature – Automatically detects whether the controller is a 4-20mA sink or source and sets itself appropriately, eliminating the risk of being incorrectly set
- Smart Sensor – Detects when a sensor module is connected and uploads selected gas type, range, device and alarm levels
Reliability
- Smart Bump Test Features – Enables sensor health and response to be verified quickly and easily using test gas. The process is automated and provides a reminder when it is time to test the sensor
- Calibration Due Warning – Reminds the user when calibration is due to ensure that the sensors are always operational and working as they should
- Sensor range selection – The user can set the sensor's full-scale range via the display menu.
Product sheet
XgardIQ Data sheet
